VIQUA VH410 Whole House UV Water Treatment System

The larger size and flow rate of the VIQUA VH410 ultraviolet water treatment system makes it ideal for UV water treatment of larger sized homes, or light-commercial use.

With a flow rate of up to 18 gpm, the VH410 inactivates the following microorganisms: Cryptosporidium, Giardia, E.Coli and Fecal Coliform using UV light. This makes the VH410 system a reliable and economical way to treat residential drinking water.

The VIQUA HOME family of compact UV systems provide a reliable and economical way to treat drinking water in virtually any residential application.

• Equipped to inactivate Cryptosporidium, Giardia, and E.Coli.
• Specially designed and tested UV lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous treatment. High output lamps allow for small footprint while providing the same UV performance as a standard output lamp in a longer chamber.
• The system is simple to maintain and service allowing for easy lamp replacement.
• Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.
• Safety-Loc™ connector with interlock that ensures power is disconnected before lamp can be removed.
• The controller visually displays the remaining lamp life and will go into alarm if the lamp fails. Monitored systems are equipped with a UV sensor which provides a continuous readout of UV intensity.
• The manufacturer strongly recommends installing a sediment pre-filter system to remove particulate that can impact the success of your UV system.
• A water softener is necessary if water hardness is greater than 7 grains (120 mg/L) or iron greater than 0.3 mg/L to prevent scale buildup on the quartz sleeve.